Skip Navigation Website Accessibility

ToobSeal Inflatable Boat Sealant


Add to Cart

or call: 8014555450
Bixler’s ToobSeal ® Interior Sealer, gallon, stops slow seam leaks and porosity in both Hypalon and PVC inflatable boats using an extraordinary acrylic based formula.  

Since 1994, Bixler’s ToobSeal Interior Sealer, gallon, has been stopping slow seam leaks and porosity using an extraordinary flexible acrylic based formula.  Our Interior Sealer is for use with both Hypalon and PVC inflatable boats, whitewater rafts, and is perfect for the old leaky Zodiac, Avon or Achilles inflatable. Unlike other brands which are Latex, ToobSeal ® is the only sealant made of Acrylic which dries clear and smooth and doesn’t yellow and crack. Our exclusive self leveling formula will seal your slow leaks more effectively and if you should spill some on your inflatable or garage floor, it won’t cause an impossible-to-remove yellow stain.  The above picture shows ToobSeal ® drying clear and smooth on top and a Latex sealant drying cracked, bubbled and yellowed.  No other inflatable boat sealant comes close to our ToobSeal formula.  Our safe and easy-to-use sealer adheres to the interior fabric of the tube, sealing slow leaks and prevents potential future leaks from arising. Hard to find leaks are treated and cured from the inside.  That’s why the US Marine Corps trusts and uses ToobSeal.  Watch our video of this product here:
The  special formula encapsulates when dry so there is no chance of your inflatable boat fabric self adhering and making re-inflation hopeless. This is why our Interior Repair Sealer has been used by boaters and boat service facilities since 1994. One quart bottle will seal a 10′ inflatable boat or raft, 6 air mattresses or 25 4′ pool toys
“I’ve used and sold it for years.  It works great!”
Mitch Bernardo, Sunset Inflatables, Santa Ana, California
“My techs prefer ToobSeal to other brands. It works better and doesn’t leave yellow stains on the boats they’re repairing.”
Dick Cromwell, InflatableXperts of RI and MD
Instructions for boats under 12 feet:
1. Deflate the boat. 
2. Inject 1 quart (32oz) Interior Sealer equally into all the air chambers.
3. Inflate the boat. 
4. Shift the boat side to side and bow to stern at a 45 degree angle until the sealer has circulated and coated all inner surfaces of the boat. Sealer has the consistency of water so it is easy to apply. 
5. Let dry for three hours. Boat is sealed! ToobSeal has an indefinite shelf life and can be stored anywhere. 

For Boats over 12 feet:
1. Follow above instructions using roughly 3 oz of Interior Sealer per foot as a quantity guideline.
For repair paint, see Liquid Rubber in related products below.